Binary Interfaces
Bus Pirate [/dev/ttyS0]
HiZ> binmode
Select binary mode
1. SUMP logic analyzer
2. Binmode test framework
3. Arduino CH32V003 SWIO
4. Follow along logic analyzer
5. Legacy Binary Mode for Flashrom and AVRdude (EXPERIMENTAL)
x. Exit
> 1
Binmode selected: SUMP logic analyzer
HiZ>
Select binary mode
1. SUMP logic analyzer
2. Binmode test framework
3. Arduino CH32V003 SWIO
4. Follow along logic analyzer
5. Legacy Binary Mode for Flashrom and AVRdude (EXPERIMENTAL)
x. Exit
> 1
Binmode selected: SUMP logic analyzer
HiZ>
The Bus Pirate has two USB serial ports. One is used for the command line terminal. The other can be configured to use various protocols that support software running on a PC.
- SUMP logic analyzer protocol
- Binmode test framework
- Arduino CH32V003 SWIO
- Follow Along Logic Analyzer protocol
- Legacy Binary Mode for Flashrom and AVRdude
Use the binmode command see the currently supported binary modes and to select the active binary mode.