📄️ Commands
HiZ> i
📄️ Bus Syntax
A simple syntax is used to interact with chips. Syntax characters have
📄️ 1-Wire Protocol
Overview
📄️ I2C Protocol
Overview
📄️ UART/Serial Protocol
Overview
📄️ SPI Protocol
Overview
📄️ LED Protocols
Overview
📄️ JSON Configuration Files
Global and mode settings will be saved and reloaded when a TF flash card is inserted in the Bus Pirate. The settings are saved in simple JSON files. Configuration files can be viewed and edited from the USB disk that appears when the Bus Pirate is connected.